Skip to main content

stromsensor.S0light

Photo of the stromsensor.S0light

The stromsensor.S0light reads electricity sub-meters that are marked "1000 imp/kWh". You connect it to the Node with a cable and place it on the meter.

Recommendation for connecting

Connect the stromsensor.S0light to Port 3 or 4 of the Node if possible. Any port works, but Ports 3 + 4 extend the battery life.

Is this the right sensor?​

Meter with the interface marked for the stromsensor.S0light

The interface of your meter is usually labelled with the unit "1000 imp/kWh". The marked spot shows the interface you place the sensor on.

Not sure whether your meter fits?

Check your meter model in the compatibility list at energieleser.de.

Connecting and attaching the sensor​

1. Connecting the sensor to the Node​

Plug the sensor's cable into a port of the Node – preferably Port 3 or 4, which gives the longest battery life. You can find which ports are possible for which sensor under Connecting Sensors to the Node.

2. Attaching the sensor to your meter's interface​

Animation: attaching the stromsensor.S0light to the meter

Next step​

Once all sensors are connected and attached, continue with Attaching the Node.