Technical Specifications
The energieleser.bridge was developed to receive the readings of radio-based meters (wM-Bus, OMS) and the energieleser.node. The Bridge transmits the captured readings via your WiFi to the Energieleser app or to Home Assistant. Setup is done with a smartphone.
| Feature | Details |
|---|---|
| Radio reception | wM-Bus (OMS) |
| Supported meters and devices | Radio-based electricity, gas, water and heat meters, wireless smoke detectors, energieleser.node |
| Network | WiFi 2.4 GHz |
| Setup | Via smartphone (Bluetooth) |
| Viewing readings | Energieleser app, Home Assistant |
| Power source | USB-C |
| Power consumption | max. 4 W |
| User controls | 1 button (factory reset), 1 status LED |
| Updates | Over the internet |
| Dimensions & weight | 122 × 41 × 22 mm, 41 g |
| Operating environment | −5 to 55 °C, indoor use only |
| Suitable for | Indoor use |
info
Specifications describe typical performance under the conditions we tested and may vary with your installation.
Next step
Continue to Safety & Compliance.